Cellular Base Station Rogers4350B Board

RO4000® Laminates

Industry leading RO4000® hydrocarbon ceramic laminates and prepregs offer superior high frequency performance and low cost circuit fabrication resulting in a low loss material which can be fabricated using standard epoxy/glass (FR-4) processes.

RO4000 material possesses the properties needed by designers of RF microwave circuits and matching networks and controlled impedance transmission lines. RO4000 series laminates offer a range of dielectric constants (2.55 - 6.15), are available with UL 94 V-0 flame retardant versions.

Benefits
Optimized cost and RF / microwave performance
Compatible with FR-4 fabrication including multilayer PCB constructions
High thermal conductivity for improved thermal management over traditional PTFE materials
Robust lead-free solder processing compatibility
Low Z-axis CTE for reliable plated through-hole quality
Typical Applications

Cellular Base Station Antennas and Power Amplifiers
Microwave point to point (P2P) links
Automotive Radar and Sensors
RF Identification (RFID) Tags
LNB’s for Direct Broadcast Satellites

RO4350B™ materials are proprietary woven glass reinforced hydrocarbon/ceramics with electrical performance close to PTFE/woven glass and the manufacturability of epoxy/ glass.

Providing tight control on dielectric constant and low loss while utilizing the same processing method as standard epoxy/glass, RO4350B is available at a fraction of the cost of conventional microwave laminates. No special through-hole treatments or handling procedures are required as with PTFE based microwave materials.

RO4350B materials are UL 94V-0 rated for active devices and high power RF designs.

Typical Applications

Cellular Base Station Antennas and Power Amplifiers
Microwave point to point (P2P) links
Automotive Radar and Sensors
RF Identification (RFID) Tags
LNB’s for Direct Broadcast Satellites

Key specifications/special features:
Rogers PCB
Rogers 4350B, Roger3003, Rogers4003,Roger 5880,Rogers6002 and more material on stock
PCB thickness: 0.2-2mm+/-10%
Final copper: 0.5-10oz
Min hole: 0.2mm
Min line width/space: 4/4mil
Min hole copper: 20μm/25μm
Solder mask: green/blue/red/black/gray/white
Legend: white/black/yellow
Surface: OSP/HAL lead-free/immersion gold/immersion tin/
immersion silver/flash gold/hard gold
Outline: rout and score/V-cut
E-test: 100%
Certificates: UL, SGS, RoHS Directive-compliant, ISO
Files: Gerber Protel DXP Auto CAD PADs eagle
Testing: flying probe test, E-test, X-ray Inspection, AOI

Sufficient stock:
We have sufficient rogers material raw as follow:RO4003C,RO4350B,RO4360,RO4533,RO4535,RO4730,
RO4232,RO4233,RO3003,RO3006,RO3010,RO3035,RO3203,RO3206,
RO3210,RO3730,RO5780,RO5880,RO6002,RO3202,RO6006,
Frequently-used is 4003C,4350B,5880
So we can do pcb circuit board with your detail requirements in the case of you send us gerber files or any other files

High frequency:

Q: What kinds of test function will be offered?
A: To make sure the production quality, we offer the below testing procedure to guarantee every piece of product:
1) AOI (Automated Optical Inspection)
2) Automatic short-circuit testing
3) RoHS detector
4) Dielectric tester
5) Impedance control
6) Metallographic microscope
7) Fly probe/ fixture mold
8) Visual inspection
Q: What kinds of quality Raw Materials will be used?
A: We use top raw materials as below, ensuring product quality from the source.
Board Brand: Isola, Rogers, Arlon, Nelco, Taconic,etc
Potion: Rohm&Haas, Atotech, Umicore
Printing Ink: Taiyo, Rongda
Dry Film: Asahi, Dupont, Etertec
Q: Can we have a factory tour?
A: Welcome to visit our factory in Guangdong! Please inform us at least a week in advance, so that we could arrange the schedule for you.
Q: How to get the free sample?
A: Please send us the Gerber file and the necessary data information for PCB prototype. Once you make an mass order, the sample fee will be deducted from the total balance.
Q: Could we choose the shipment way we prefect?
A: Sure you can. We have long-term cooperation with DHL, FEDEX, TNT and UPS. If some specific request, please let us know.

Xinchenger Electronics co.,Ltd established in 2009,we have committed ourselves to manufacturing various of printed circuit boards.

We have accumulated abundant experiences in the line of high frequency microwave business for which widely apply to power divider,combiner,power amplifier,line amplifier,base station,RF antena,4G antena so on and so forth. Our company's sufficient stocks of hi-frequency pcb materials such as Rogers,TACONIC,Arlon,Isola,F4B,TP-2,FR-4 (dielectric rage:2.2-16) mainly used in the area of high technologies like communication device,Electronics,Aerospace,Military industry to meet our worldwide customers with high quality. Furthermore,we also keen on helping customers shorten the period of production development and 24 hours of sample service is available.

Since the day of company foundation we continuously engaged in researching special and high precision printed circuit boards with the strong production capability of 2 to 28 layers of highly precise impedence,multi-layer blind buried,multi-layer mix-compression,high TG, copper substrate,Ceramic substrate PCB. We emphasize the significance of traning program for every single staff in the company even grass-roots employees which becomes the most competitive factors to excel from others,our company have many experienced and professional teams from management to production line,30% are highly educated among the total amount of employees,advanced engineers and senior technicians are up to 80 people.

With advanced foreign technology supports and domestic 3G/4G device manufacturer in microwave pcb field which lead our experienced hi-frequency researching team to one step ahead of the line of printed circuit board business,we are honored to obtain sound reputations over our worldwide customers on the basis of fine qulity,prompt delivery,satisfied after sales service for may years and we assure our customers that we will return the favors with more and more superior products in the near future.